Fs 4 0 24 Volt
NO Accuation: 0.220' ± 0.015' NC Accuation: 0.160' ± 0.015' 5/8' Hex Nut Common Model Configurations Model Number Model Description FS-400-S-M1-M1-0.6-P0-24 Stainless Steel Stem and Float, Standard Temperature, 0.6 SG, 1/4” NPTM, 24” Wires FS-400-HT-M1-M1-0.6-P0-24 Stainless Steel Stem and Float, High Temperature, 0.6 SG, 1/4” NPTM, 24. Kobalt 24-volt max 4.0-Ah Li-ion battery provides more power and runtime, so you can get the job done fast. Power indicator displays charge status and can be used whether the battery is on the tool or off. Internal circuitry protects the battery pack from extreme. Free shipping BOTH ways on nike fs lite run 4 from our vast selection of styles. Fast delivery, and 24/7/365 real-person service with a smile. Click or call 800-927-7671.
Switches and Lighting Control, Fluorescent Starter, 13-30-40W. Benefits are derived from well implemented Solutions. The challenge to save energy, improve safety or make sure everything continues to perform in a harsh environment, are all candidates for good solutions. They are mainly used for straight line bends or folds and are capable of heating up to 1/2' thick material. 120-volt trays come with standard 120-volt pigtail and are ready for operation. Maximum operating temperature is 800ºf. Free-Standing Heater is also available as 4' (FS-48) only.
Fs 4 0 24 Volt Lithium Battery
Search This Site | Browse by Vehicle Make and Model | Browse All PartsAll Parts
Accessories
Axles
Batteries
Battery Chargers
Battery Harnesses
Bearings
Belts
Brakes
Brake Cables
Brakes Levers
Bulbs
Chain
Chargers
Charger Ports
Connectors
Controllers
Circuit Breakers
Drive Belts
Forks
Freewheels
Fuses
Fuse Holders
Grips
Handlebars
Hardware
Headlights
Horns
Inner Tubes
Key Switches
Kickstands
Kits
Lighting
Meters
Mirrors
Motors
Relays
Rims
Shock Absorbers
Seats
Seat Posts
Speed Controllers
Sprockets
Switches
Taillights
Throttles
Tires
Tools
Tubes
Turn Signals
Voltage Converters
Wheels
Wire
Wire Connectors
|
|
| Razor Parts > Razor Dirt Quad Parts Razor Dirt Quad Owners Manual
Razor Dirt Quad Troubleshooting Guide
Razor Dirt Quad Battery Installation Manual
Razor Dirt Quad Wiring Diagram Version 1-2
Razor Dirt Quad Wiring Diagram Version 3-6
Razor Dirt Quad Wiring Diagram Version 7-10
Razor Dirt Quad Wiring Diagram Version 11+ Some parts for the Razor® Dirt Quad are version specific. The version number is located on the ID tag which may be found on the battery charger, battery box, footrest, deck platform, or other areas. ID Tag Locator The 7th and 8th numbers on the Razor® ID tag are the version number. For example:
01 = Version 1
09 = Version 9
14 = Version 14 Battery Set for Razor® Dirt Quad Electric ATV
Set of two 12 Volt 8Ah batteries for the Razor® Dirt Quad electric all-terrain vehicle. Includes 12 month battery replacement warranty.
Warranty Details
Item # RDQ-BATTERIES | $49.90
|
Battery Set for Razor® Dirt Quad Electric ATV (Extended Range)
Set of two 12 Volt 9Ah batteries for the Razor® Dirt Quad electric all-terrain vehicle. Arturia trida pre v1 0 0 264 download free. This 9Ah battery set provide 12% more mileage range than the 8Ah batteries sold above. Includes 12 month battery replacement warranty.
Warranty Details
Item # RDQ-BATTERIES-XR | $55.90
|
Battery Pack with Harness for Razor® Dirt Quad Electric ATV
Set of two 12 Volt 8Ah batteries with plug-and-play wiring harness and connector for the Razor® Dirt Quad electric all-terrain vehicle. Includes 12 month battery replacement warranty.
Warranty Details
Item # BAT-RAZ1 | $59.95
|
Battery Pack with Harness for Razor® Dirt Quad Electric ATV (Extended Range)
Set of two 12 Volt 9Ah batteries with plug-and-play wiring harness and connector for the Razor® Dirt Quad electric all-terrain vehicle. This 9Ah battery pack provide 12% more mileage range than the 8Ah batteries sold above. Includes 12 month battery replacement warranty.
Warranty Details
Item # BAT-RAZ1-XR | $65.95
|
Battery Charger for Razor® Dirt Quad Electric ATV
Original battery charger for all versions of the Razor® Dirt Quad electric all-terrain vehicle. Charger rating 24 Volt 1.5 Amp (1500mA).
Item # CHR-R24V1.5A | $29.95
|
Battery Charger for Razor® Dirt Quad Electric ATV
Replacement battery charger for all versions of the Razor® Dirt Quad electric all-terrain vehicle. Charger rating 24 Volt 1.6 Amp (1600mA).
Item # CHR-24V1.6A3P | $24.95
|
Quick-Charge Battery Charger for Razor® Dirt Quad Electric ATV
Fast rate battery charger for all versions of the Razor® Dirt Quad electric all-terrain vehicle. Recharges the battery pack in around half the time that the original charger takes. Charger rating 24 Volt 3 Amp (3000mA).
Item # CHR-24V3A3P | $49.95
|
Charger Port for Razor® Dirt Quad Electric ATV
Battery charger port for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RAZ-PORT2 | $7.95
|
Power Switch for Razor® Dirt Quad Electric ATV
On/Off power switch for the Razor® Dirt Quad electric all-terrain vehicle.
Item # SWT-156 | $5.95
|
Waterproof Power Switch Cover for Razor® Dirt Quad Electric ATV
Waterproof power switch cover for the Razor® Dirt Quad electric all-terrain vehicle.
Item # SWT-C150 | $0.95
|
Power Switch for Razor® Dirt Quad Electric ATV
On/Off power switch with switch wiring harness and cover for the Razor Dirt Quad electric all-terrain vehicle.
Item # SWT-164 | $9.95
|
Fuse for Razor® Dirt Quad Electric ATV
Fuse for the Razor® Dirt Quad electric all-terrain vehicle. Fuse rating 30 Amp.
Item # FUS-ATO30 | $.95
|
Handlebar Grip Set for all Razor® Dirt Quad Electric ATV
Handlebar grip set for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RAZ-GRIPS3 | $6.95
|
Handlebar Grip Set for Razor® Dirt Quad Electric ATV
Handlebar grip set for all versions of the Razor® Dirt Quad electric all-terrain vehicle.
Item # GRP-55SET | $4.95
|
| Throttle Top Speed Adjustable Limiter for Razor® Dirt Quad Electric ATV
All Versions
Adjustable top speed limiter for all versions of the Razor® Dirt Quad Electric all-terrain vehicle. Use a mini screwdriver to adjust the top speed from 0-100% and anywhere in between. Easy to install. Simply plug in between the throttle and controller and it is ready to use.Ideal for training beginning riders because the top speed can be adjusted slower at first and then faster as their riding skill level increases.
Item # RAZ-LIMITER2 | $9.95
|
Throttle for Razor® Dirt Quad Electric ATV
Version 1-10
Original twist throttle for version 1-10 of the Razor® Dirt Quad electric all-terrain vehicle.
Item # THR-52 | $19.95
|
Throttle for Razor® Dirt Quad Electric ATV
Version 1-10
Replacement twist throttle for version 1-10 of the Razor® Dirt Quad electric all-terrain vehicle.
Item # THR-52R | $21.95
|
Throttle for Razor® Dirt Quad Electric ATV
Version 11+
Twist throttle for version 11+ of the Razor® Dirt Quad electric all-terrain vehicle.
Item # THR-57 | $19.95
|
Speed Controller for Razor® Dirt Quad Electric ATV
Version 1-10
Speed control module for version 1 through 10 of the Razor® Dirt Quad electric all-terrain vehicle.
Item # SPD-CT201C63Replaces part numbers: CT-201C6-3A, 201C6-3A, HB2430-TYD-FS, HB2430-TYD-FS-ROHS, and HB2430-TYD-HCH. | $35.95
|
This controller has been discontinued by the manufacturer so we had a replacement controller made by a different factory. The new controller looks different than the original but is plug and play. Simply unplug the old controller and plug the new one in. The new controller does not have the same mounting holes so we include two pieces of 3M® brand double sided foam tape for mounting it to the Dirt Quad. Speed Controller for Razor® Dirt Quad Electric ATV
Version 11+
Speed control module for version 11 and up of the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-CONTROLLER2 | $29.95
|
Throttle and Speed Controller Kit for Razor® Dirt Quad Electric ATV
Version 1+
Throttle and speed control module replacement kit for version 1 and up of the Razor® Dirt Quad electric all-terrain vehicle. Works with all Dirt Quad versions.
Item # RDQ-EKIT2 | $49.95
|
Motor for Razor® Dirt Quad Electric ATV
Electric motor with gearbox, chain tension adjuster, and chain sprocket for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-MOTOR | $75.95
|
Motor Sprocket for Razor® Dirt Quad Electric ATV
Motor sprocket for the Razor® Dirt Quad electric all-terrain vehicle.
Item # SPR-825 | $14.95
|
Motor Key for Razor® Dirt Quad Electric ATV
Motor key for the Razor® Dirt Quad electric all-terrain vehicle. This part goes in between the motor's shaft and the motor sprocket.
Item # RAZ-MOTORKEY | $1.95
|
Rear Axle Key for Razor® Dirt Quad Electric ATV
Rear axle key for the Razor® Dirt Quad electric all-terrain vehicle. This part goes in between the rear axle and the rear axle brake disc and chain sprocket adapter flange/hub.
Item # RAZ-AXLEKEY | $1.95
|
Chain with Master Link for Razor® Dirt Quad Electric ATV
Chain with master link for the Razor® Dirt Quad electric all-terrain vehicle. This chain has a removable master link which makes future chain replacement an easier job.
Item # RDQ-CHAIN-MLChains with master links make chain removal and installation easier because the rear axle does not need to be removed and reinstalled. | $9.95
|
Continuous Loop Chain for Razor® Dirt Quad Electric ATV
Original style continuous loop chain for the Razor® Dirt Quad electric all-terrain vehicle. This chain is riveted together into a continuous solid loop just like the Dirt Quad's original chain.
Item # RDQ-CHAIN-CL | $9.95
|
Chain Tensioner for Razor® Dirt Quad Electric ATV
Two piece chain tensioner with spring and mounting hardware for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-TENSIONER | $9.95
|
Chain Guard for Razor® Dirt Quad Electric ATV
Chain guard with mounting hardware for the Razor® Dirt Quad electric all-terrain vehicle. Includes upper and lower chain guard sections and mounting fasteners.
Item # RDQ-CHAINGUARD | $11.95
|
Brake Lever for Razor® Dirt Quad Electric ATV
Brake lever with brake switch for all versions of the Razor® Dirt Quad electric all-terrain vehicle.
Item # RAZ-LEV1 | $12.95
|
Brake Cable for Razor® Dirt Quad Electric ATV
Brake cable for the Razor® Dirt Quad electric all-terrain vehicle.
Item # CBL-101 | $3.95
|
Brake Caliper for Razor® Dirt Quad Electric ATV (For 2mm Brake Rotors)
Brake caliper assembly with brake pads and mounting hardware for the Razor® Dirt Quad electric all-terrain vehicle. This brake caliper fits both front and back wheels.For MX500 versions with 2mm wide brake rotors.
Item # BRK-500R-2MOlder version Razor Dirt Quads have 2mm wide brake rotors and newer version Razor Dirt Quads have 3mm wide brake rotors. A 5 cent nickel is approximately 2mm wide and can be used to determine the rotor's width as shown below. | $19.95
|
Brake Caliper for Razor® Dirt Quad Electric ATV (For 3mm Brake Rotors)
Brake caliper assembly with brake pads and mounting hardware for the Razor® Dirt Quad electric all-terrain vehicle. This brake caliper fits both front and back wheels.For MX500 versions with 3mm wide rotors.
Item # BRK-500R-3MOlder version Razor Dirt Quads have 2mm wide brake rotors and newer version Razor Dirt Quads have 3mm wide brake rotors. A 5 cent nickel is approximately 2mm wide and can be used to determine the rotor's width as shown below. | $19.95
|
Brake Pad Set for Razor® Dirt Quad Electric ATV
Brake pad set for the Razor® Dirt Quad electric all-terrain vehicle. Compatible with calipers for both 2mm wide and 3mm wide rotors.
Item # BRK-500P-V1These brake pads are both the exact same size. Some Razor® Dirt Quads have brake pads that are slightly different sizes. Different size brake pads are sold below. | $8.95
|
Brake Pad Set for Razor® Dirt Quad Electric ATV
Brake pad set for the Razor® Dirt Quad electric all-terrain vehicle. Compatible with calipers for both 2mm wide and 3mm wide rotors.
Item # BRK-500P-V2These brake pads are slightly different sizes. Most Razor® Dirt Quads have brake pads that are the exact same size. Same size brake pads are sold above. | $8.95
|
Tire for Razor® Dirt Quad Electric ATV
Version 1-18
Tire for version 1-18 of the Razor® Dirt Quad electric all terrain vehicle. Fits both front and rear wheels. Tire size 13x5.00-6.
Item # RDQ-TIRE1 | $22.95
|
Tube for Razor® Dirt Quad Electric ATV
Version 1-18
Tube for version 1-18 of the Razor® Dirt Quad electric all terrain vehicle. Fits both front and rear wheels. Tube size 13x5.00-6.
Item # RDQ-TUBE1 | $9.95
|
Tire for Razor® Dirt Quad Electric ATV
Version 19+
Tire for version 19 and up of the Razor® Dirt Quad electric all terrain vehicle. Fits both front and rear wheels. Tire size 12x5.00-6.
Item # RDQ-TIRE2 | $22.95
|
Tube for Razor® Dirt Quad Electric ATV
Version 19+
Tube for version 19 and up of the Razor® Dirt Quad electric all terrain vehicle. Fits both front and rear wheels. Tube size 12x5.00-6.
Item # RDQ-TUBE2 | $9.95
|
Front Wheel for Razor® Dirt Quad Electric ATV
Version 1-18
Complete front wheel assembly including 13x5.00-6 tire and tube plus bolted-on flange with bearings for version 1-18 of the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-FRONTWHEEL1This 13' diameter front wheel has been discontinued and is no longer available however it can be replaced with the 12' diameter wheel item # RDQ-FRONTWHEEL2 sold below. We recommend replacing both the left and right side front wheels at the same time so the quad sits evenly on the ground. |
$44.95
|
Rear Wheel for Razor® Dirt Quad Electric ATV
Version 1-18
Complete rear wheel assembly including 13x5.00-6 tire and tube for version 1-18 of the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-REARWHEEL1This 13' diameter rear wheel has been discontinued and is no longer available however it can be replaced with the 12' diameter wheel item # RDQ-REARWHEEL2 sold below. We recommend replacing both the left and right side rear wheels at the same time so the quad sits evenly on the ground. | $44.95
|
Front Wheel for Razor® Dirt Quad Electric ATV
Version 19+
Complete front wheel assembly including 12x5.00-6 tire and tube plus bolted-on flange with bearings for version 19 and up of the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-FRONTWHEEL2 | $44.95
|
Rear Wheel for Razor® Dirt Quad Electric ATV
Version 19+
Complete rear wheel assembly including 12x5.00-6 tire and tube for version 19 and up of the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-REARWHEEL2 | $44.95
|
Front Wheel Bearing Set for Razor® Dirt Quad Electric ATV
Set of two bearings for front wheel of the Razor® Dirt Quad electric all terrain vehicle. Each front wheel uses one set of these bearings.
Item # RAZ-BEARINGSET4 | $5.95
|
Rear Axle Bearing Set for Razor® Dirt Quad Electric ATV
Set of two bearings for rear axle of the Razor® Dirt Quad electric all terrain vehicle.
Item # RAZ-BEARINGSET6 | $6.95
|
Rear Axle with Brake Disc and Chain Sprocket for Razor® Dirt Quad Electric ATV
Rear axle with brake disc and chain sprocket for the Razor® Dirt Quad electric all-terrain vehicle. Includes axle, brake disc, brake disc axle hub, chain sprocket, chain sprocket axle hub, and installation hardware.
Item # RDQ-AXLE | $39.95
|
Shock Absorber For Razor® Dirt Quad Electric ATV
Shock absorber with mounting hardware for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RAZ-REARSHOCK1 | $14.95
|
Steering Tube for Razor® Dirt Quad Electric ATV
Steering tube with rubber hole plug for the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-STEERINGTUBE | $19.95
|
Adjustable Tie Rod for Razor® Dirt Quad Electric ATV
Adjustable tie rod with mounting hardware for the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-TIEROD1 | $12.95
|
Non-Adjustable Tie Rod for Razor® Dirt Quad Electric ATV
Non-adjustable tie rod with mounting hardware for the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-TIEROD2 | $9.95
|
Spindle Arm Set for Razor® Dirt Quad Electric ATV
Set of left and right side spindle arms with king pins and mounting hardware for the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-SPINDLEARMS | $19.95
|
King Pin Bushing Set for Razor® Dirt Quad Electric ATV
Upper and lower king pin bushings with king pin for the Razor® Dirt Quad electric all terrain vehicle.
Item # RDQ-BUSHINGSET | $7.95
|
Handlebars for Razor® Dirt Quad Electric ATV
Handlebars for all versions of the Razor® Dirt Quad electric all terrain vehicle.
Item # RAZ-HANDLEBARS2 | $14.95
|
Handlebar Clamps for Razor® Dirt Quad Electric ATV
Handlebar clamps with mounting hardware for the Razor® Dirt Quad electric all terrain vehicle.
Item # RAZ-CLAMPS | $12.95
|
Battery Cover for Razor® Dirt Quad Electric ATV
Battery cover for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-BATTERYCOVER | $14.95
|
Body Fairing for Razor® Dirt Quad Electric ATV - Red
Body fairing for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-BODY | $49.95
|
Footrests for Razor® Dirt Quad Electric ATV
Set of two footrests for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-FOOTRESTS | $19.95
|
Display None Start Front Wheel Flanges for Razor® Dirt Quad Electric ATV
Set of two front wheel flanges / hubs the Razor® Dirt Quad electric all terrain vehicle. Each flange included two wheel bearings and wheel mounting hardware.
Item # RDQ-FLANGES | $17.95
|
Axle Sprocket for Razor® Dirt Quad Electric ATV
Rear axle sprocket for the Razor® Dirt Quad electric all-terrain vehicle.
Item # RDQ-AXLESPROCKET | $19.95
|
Display None End
| 2500 Lumen 3 LED Ultra-Bright Headlight for Razor® Dirt Quad Electric ATV
Super bright 2500 lumen rechargeable LED headlight set for the Razor® Dirt Quad electric all-terrain vehicle. Machined aluminum and glass headlight construction with very good build quality. Push button switch on back of light activates four different power modes: low, medium, high, and flashing. Low power mode is bright and suitable for most riding conditions. Medium power mode is very bright and suitable for demanding riding conditions. High power mode is extremely bright and suitable for higher speed riding and off-road trails. In flashing mode this light blinks on and off very fast. Includes optional adjustable headband, 2500 lumen three LED headlight, handlebar and headband mounting bands, 110-240VAC universal battery charger and a 4400mA 8.4 Volt rechargeable lithium-ion battery in a black nylon carry case with Velcro mounting straps. The battery lasts around 7 hours on low mode, 3 hours on medium mode, 2 hours on high mode and takes 1-5 hours to fully recharge depending on how long the light was on for.
Item # LIT-140 | $49.95
|
53 LED Headlight for Razor® Dirt Quad Electric ATV
Bright 53 LED headlight for the Razor® Dirt Quad electric all-terrain vehicle. Top mounted push button switch activates three different power modes: low, medium and high. High power mode turns on all 53 LED's at once. This headlight lights up the road very well at night compared to most other LED headlights. Requires 3 AA cell batteries. (batteries not included)
Item # LIT-53LED | $11.95
|
Safety Warning Bell for Razor® Dirt Quad Electric ATV
Safety warning bell for all versions of the Razor® Dirt Quad electric all-terrain vehicle.Pleasant sounding and attention grabbing chime bell sound lets others know that you are on the road in a friendly yet effective way.
Item # BEL-300 | $2.95
|
Safety Warning Bell With Compass for Razor® Dirt Quad Electric ATV
Pleasant sounding and attention grabbing bell sound for the Razor® Dirt Quad electric all-terrain vehicle. Built-in real magnetic compass. Easy to install.
Item # BEL-360 | $3.95
Iron man 3 bonus code. |
2-1/2' Valve Stem Extender for Razor® Dirt Quad Electric ATV
2-1/2' long chrome-plated brass valve stem extender with cap. For filling hard to reach valve stems.
Item # VXT-160 | $2.79
|
7-1/4' Brass Valve Stem Extender for Razor® Dirt Quad Electric ATV
7-1/4' overall extension length. For hard to reach valve stems. Rubber hose with brass hardware.
Item # VXT-714 | $7.95
|
Green Slide® Chain Lube for Razor® Dirt Quad Electric ATV
Green Slide® safe and biodegradable chain lube. The perfect lube for electric scooters and bikes. Made from highly modified tree and plant oils with all natural cling and anti-oxidation additives.
4 fluid ounce / 120 ml bottle. More Information
Item # GSL-4OZ | $4.95
Www betcris com. |
Slime® Inner Tube Sealant for Razor® Dirt Quad Electric ATV
Instantly seals punctures in the tread area up to 1/8'. Remains liquid, evenly coating the inside of the tube. Non-flammable, non-toxic, water soluble, easy to use. For the Razor® Dirt Quad ATV we recommend using 1/2 bottle of tube sealant per tire. 8 fluid ounce / 237mL bottle.
Item # TIR-SL8 | $7.95
|
|
Fs 4 0 24 Volt Lithium Ion Battery
Search This Site | Browse by Vehicle Make and Model | Browse All PartsAll Parts
Accessories
Axles
Batteries
Battery Chargers
Battery Harnesses
Bearings
Belts
Brakes
Brake Cables
Brakes Levers
Bulbs
Chain
Chargers
Charger Ports
Connectors
Controllers
Circuit Breakers
Drive Belts
Forks
Freewheels
Fuses
Fuse Holders
Grips
Handlebars
Hardware
Headlights
Horns
Inner Tubes
Key Switches
Kickstands
Kits
Lighting
Meters
Mirrors
Motors
Relays
Rims
Shock Absorbers
Seats
Seat Posts
Speed Controllers
Sprockets
Switches
Taillights
Throttles
Tires
Tools
Tubes
Turn Signals
Voltage Converters
Wheels
Wire
Wire Connectors
|
|
| | 12 Volt Controllers | 18 Volt Controllers | 24 Volt Controllers | 36 Volt Controllers | 48 Volt Controllers | 60 Volt Controllers | 72 Volt Controllers |
24 Volt Brushed
Motor Controllers | 24 Volt Brushless
Motor Controllers |
24 Volts Speed Controllers for Brushed Motors 24 Volt
120 Watt
Try powerpoint for free. | 24V 120W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 120 Watts. Maximum current 10 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24120
Wiring Directions | $16.95
|
24 Volt
150 Watt
| 24V 150W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 150 Watts. Maximum current 15 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24150
Wiring Directions | $19.95
|
24 Volt
250 Watt
| 24V 250W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250
Wiring Directions | $29.95
|
24 Volt
250 Watt
| E-Scooter and E-Bike 24 Volt 250 Watt Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250A
Wiring Directions | $29.95
|
24 Volt
250 Watt
| 24V 250W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 250 Watts. Maximum current 20 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24250B
Wiring Directions | $29.95
|
Cascadia 1 4 5 0. 24 Volt
350 Watt
| 24V 350W Electric Scooter or Bike Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24350B
Wiring Directions | $34.95
|
24 Volt
350 Watt
| CT-201C6 24V 350W Electric Scooter or Electric Dirt Bike Speed Controller
Designed for 24 Volt motors up to 500 Watts. Most commonly used on older model Razor scooters and bikes with 250 and 350 Watt motors. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-CT201C6
Wiring Directions | $29.95
|
24 Volt
350 Watt
| CT-302S9 24V 350W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Model CT302S-9
Item # SPD-CT302S9
Wiring Directions | $34.95
|
Highland 2 pro v2 0 5. 24 Volt
350 Watt
| CT-811B9 24V 350W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 350 Watts. Maximum current 25 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Model CT811B-9
Item # SPD-CT811B9
Wiring Directions | $34.95
|
24 Volt
400 Watt
| Currie 24V 400W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 400 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters up to 400 Watts that have 5 connectors and a 5 wire throttle. Model XK-022A
Item # SPD-SD400
Wiring Directions | $59.95
|
24 Volt
450 Watt
| Currie 24V 450W Electric Bicycle Speed Controller
Designed for 24 Volt motors up to 450 Watts. Maximum current 35 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Fits Currie Electro Drive 450 Watt electric bicycle conversion kit plus eZip and IZIP electric bicycles that have controllers with the same or less connectors. Some controllers that this one replaces have wires coming out of the long side instead of the short side of the case like this controller does. Replaces model numbers: 24V 35A / 24V 1-4V 35A / CT-2435-003 / DM-CB24-PAS / DM-140LA.
Item # SPD-SD450
Wiring Directions | $59.95
|
24 Volt
500 Watt | 24V 500W Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller. Fits many common electric scooter and bicycle models.
Item # SPD-24500
Wiring Directions | $39.95
|
24 Volt
500 Watt
| 24V 500W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Fits many electric scooter and bicycle models. Model: 2404 / YK31C
Item # SPD-24500B
Wiring Directions | $39.95
|
24 Volt
500 Watt
Reversible
| 24V 500W Speed Controller with Reverse
Reversible speed controller operates in either forward or reverse mode. Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends the life of the battery pack. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-24500R
Wiring Directions | $59.95
|
24 Volt
500-600 Watt
| Currie 24V 500W-600W Electric Scooter Speed Controller with 3-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Fits Currie, eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 3-wire throttle.
Item # SPD-SD300
Wiring Directions | $64.95
|
24 Volt
500-600 Watt
| Currie 24V 500W-600W Electric Scooter Speed Controller with 5-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 5-wire throttle.
Item # SPD-SD500
Wiring Directions | $56.95
|
24 Volt
500-600 Watt
| Currie 24V 500W-600W Electric Scooter Speed Controller with 6-Wire Throttle Connector
Designed for 24 Volt motors up to 600 Watts. Maximum current 30 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 6-wire throttle.
Item # SPD-SD500-6
Wiring Directions | $59.95
|
Photoshop your body online. 24 Volt
750-900 Watt
| Currie 24V 750W-900W Electric Scooter Speed Controller with 5-Wire Throttle Connector
Designed for 24 Volt motors up to 900 Watts. Maximum current 40 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Fits eZip, IZIP, Schwinn, GT, and Mongoose electric scooters that have a 5-wire throttle.
Item # SPD-SD750-5
Wiring Directions | $59.95
|
24-36 Volt
900 Watt
| 24-36V 900W Electric Scooter/Bicycle Speed Controller with Throttle
Robust heavy-duty design with large heat sinks and thick 10 gauge wires. Epoxy encapsulated electronics for a high level of water resistance. 24-36 Volt input range. Designed for 24 Volt motors up to 600 Watts and and 36 Volt motors up to 900 Watts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Includes a standard variable speed hall-effect twist throttle with matching left hand side grip. Works with both 24 and 36 Volt battery packs.
Item # SPD-36900A
Wiring Directions | $79.95
|
Replacement Throttle for SP36900A
Plug-and-play replacement twist throttle for item # SPD-36900A speed controller sold above. Includes matching left hand grip.
Item # THR-36900A | $23.95
|
24 Volt
1000 Watt
| 24V 1000W Electric Scooter Speed Controller
Designed for 24 Volt motors up to 1000 Watts. Maximum current 45 Amps. Under Voltage protection 20.5 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-241000
Wiring Directions | $46.95
|
24-36 Volt
1000+ Watt
| 24-36V 1000W Heavy-Duty Electric Scooter Speed Controller
24-36 Volt input range. Suitable for 24 Volt motors up to 1200 Watts and 36 Volt motors up to 1800 Watts. Maximum current 50 Amps. Heavy-duty design with large cooling fins for demanding applications. Current limiting feature helps prevent controller damage due to over-current conditions. Compatible with standard 3-wire variable speed hall-effect throttles. Works with both 24 Volt and 36 Volt battery packs.
Item # SPD-241000D
Wiring Directions | $74.95
|
Speed Controller for eZip® and IZIP® Electric Bicycles
Speed controller for eZip® Coastline and Trailz plus IZIP® Mountain Trails, Trailz, Skyline, and Urban Cruiser electric bicycles. Model 24V 35A, CTE-2435-002, and CB24-YR8. This controller is for bikes that have two brake switch connectors (one connector for each brake lever switch cable). Can also be used with bikes that have one brake switch connector by not using the second connector on the controller. If you do not know which controller to get choose this one because it will work with all versions.
Item # CTE-24436 | $59.95
|
Speed Controller for eZip® and IZIP® Electric Bicycles
Speed controller for eZip® Coastline and Trailz plus IZIP® Mountain Trails, Trailz, Skyline, and Urban Cruiser electric bicycles. Model: 24V 35A, and CTE-2435-001. This controller is for bikes that have one brake switch connector (both brake lever switch cables go to one connector). For bikes that have two brake switch connectors choose item # CTE-24436 sold above.
Item # CTE-24438 | $59.95
|
Speed Controller for Currie® Electric Bicycles
Speed controller for Currie® electric bicycle kit. For PAS systems only. Rated: 24V 15A
Item # CTE-24371 | $54.95
|
24 Volts Speed Controllers for Brushless Motors Brushless motors have three power wires and between zero to five sensor wires. 24 Volt
250 Watt
Brushless
| 24 Volt 150-250 Watt Electric Scooter/Moped/Bike Brushless DC Motor Speed Controller (CW or CCW)
Designed for 24V brushless DC motors between 150W and 250W. Replaces controllers with fewer connectors because most of the connectors are optional to use. Under Voltage protection 19 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Compatible with standard 3-wire variable speed hall-effect throttles.
Dimensions: 3-1/2' L x 2-1/2' W x 1-1/4' T
Item # SPD-24250BLDC | $29.95
|
24 Volt
500 Watt
Brushless
| 24 Volt 350-500 Watt Electric Scooter/Moped/Bike Brushless Motor Speed Controller (CW or CCW with Optional Reverse)
Designed for 24V brushless DC motors between 350 and 500 Watts. Replaces controllers with fewer connectors because most of the connectors are optional to use. Under Voltage protection 21.5 Volts. Current limiting feature helps prevent motor and controller damage due to over-current conditions. Under voltage protection feature helps prevent over-discharge and extends battery life. Compatible with standard 3-wire variable speed hall-effect throttles.
Dimensions: 6' L x 3-1/2' W x 1-3/4' T
Item # SPD-24500BLDC | $59.95
|
2 Pin Battery/Motor Connector Set with Pins
2 Pin battery/motor connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-50 | $1.49
|
2 Pin Throttle/Speed Controller Connector Set with Pins
2 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-51 | $1.49
|
3 Pin Battery/Motor Connector Set with Pins
3 Pin battery/motor connector set for Chinese-made electric scooters and bikes. Includes matching pin set.
Item # CNX-150 | $1.49
|
3 Pin Throttle/Speed Controller Connector Set with Pins
3 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal terminal pin set.
Item # CNX-52 | $1.49
|
4 Pin Throttle/Speed Controller Connector Set with Pins
4 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-53 | $1.49
|
6 Pin Throttle/Speed Controller Connector Set with Pins
6 Pin throttle/speed controller connector set for Chinese-made electric scooters and bikes. Includes matching terminal pin set.
Item # CNX-54 | $1.49
|
Heavy-Duty 13' Dual 2-Prong Connector
Two mating 2-Prong connectors attached to 11 inches of 10 gauge wire.
Item # CNX-2PX2 | $4.95
|
|
Fs 4 0 24 VoltCreated at 2021-01-17 02:51
Back to posts
UNDER MAINTENANCE
0 
Star